MAC215986
316
Revision A
1020081
A
B
C
D
E
F
G
Figure 4.79: Auger Drive
10. To release the chain tension, loosen jam nut (C) and turn
thumbscrew (D) counterclockwise to release the bolt
holding sprocket (B) and preventing it from being raised up.
IMPORTANT:
Do
NOT
loosen thin nut (E) on the inboard side of the idler
sprocket spindle.
11. Loosen idler sprocket nut (A), and raise sprocket (B) to the
uppermost position to release the tension on the chain.
Tighten nut (A) to hold sprocket in place.
12. Remove screw (F) and washer (G).
1013212
A
Figure 4.80: Auger Support Arm
13. Remove two bolts and nuts (A).
NOTE:
A second person may be needed to lift or support the auger
to completely remove the bolts.
1025323
A
B
C
Figure 4.81: Auger
14. Using a pry bar at location (A) between support arm (C) and
auger pivot (B), pry the auger to the right.
