MAC215986
99
Revision A
1017236
1
2
A
A
A
A
3
B
B
Figure 3.99: Auger Configurations
–
Rear View
1 - Narrow Configuration
2 - Ultra Narrow Configuration
3 - Medium Configuration
To convert to Medium configuration from Narrow or Ultra
Narrow configuration:
Two flighting kits (MAC357233 or MACB7344
) are required.
You will need to replace long flightings (A)
54
with short
flightings (B) and install additional auger fingers. A total of 22
auger fingers is recommended for this configuration.
•
For flighting replacement instructions, refer to
and
.
•
For finger installation instructions, refer to
1034027
A
A
Figure 3.100: Ultra Wide Configuration
To convert to Medium configuration from Ultra Wide
configuration:
Two flighting kits (MAC357233 or MACB7344
) are required.
You will need to install four short flightings onto the existing
welded flightings (A) and remove the extra auger fingers. A total
of 22 auger fingers is recommended for this configuration.
•
For flighting installation instructions, refer to
•
For finger removal instructions, refer to
54. The quantity of existing long flightings is either 4 or 8, depending on the current configuration.
