MAC215986
267
Revision A
S
Driveline and driveline universals; refer to
S
Upper cross auger right bearing; refer to
S
Upper cross auger sliding hubs; refer to
S
Upper cross auger center support and U-joint;
refer to
S
Float module auger pivots; refer to
S
Feed draper roller bearings, 3 locations; refer
to
S
Reel drive chain (If chain is dry at next oiling
interval
–
consider decreasing oiling interval.);
refer to
p
Knife drive box lubricant (first 50 hours only);
refer to
Changing Oil in Knife Drive Box, page
p
Header drive main gearbox lubricant (first 50
hours only); refer to
p
Header drive completion gearbox lubricant
(first 50 hours only); refer to
Header Drive Completion Gearbox, page 290
100 Hours or Annually
(Whichever Occurs First)
ü
Auger to pan and feed draper clearance; refer
to
4.7.1 Adjusting Feed Auger to Pan
ü
Main gearbox lubricant level; refer to
Checking Oil Level in Header Drive Main
Gearbox, page 286
ü
Completion gearbox lubricant level; refer to
Checking Oil Level in Header Drive Completion
Gearbox, page 288
ü
Reel drive chain tension; refer to
ü
Reel finger/cutterbar clearance; refer to
4.13.1 Reel Clearance to Cutterbar, page 417
ü
Wheel bolt torque; refer to
