MAC215986
15
Revision A
1031142
Figure 1.27: MAC313725
MAC313725
Read manual / high pressure fluid / header crushing hazard
DANGER
To prevent injury or death from improper or unsafe machine
operation:
•
Read the operator
’
s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
•
Do
NOT
allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of the machine before
starting the engine and during operation.
•
Keep riders off of the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage the header drive, put the transmission in Neutral,
and wait for all movement to stop before leaving the
operator
’
s position.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
•
Engage the safety locks to prevent lowering of raised unit
before servicing in the raised position.
•
Use a slow moving vehicle emblem and flashing warning
lights when operating on roadways unless prohibited by law.
To prevent injury or death from fall of a raised header:
•
Fully raise the header, stop the engine, remove the key, and
engage the mechanical safety locks on the combine before
going under the header.
•
Alternatively, rest the header on the ground, stop the
engine, and remove the key before servicing.
WARNING
To prevent serious injury, gangrene, or death:
•
Do
NOT
go near leaks.
•
Do
NOT
use a finger or skin to check for leaks.
•
Lower the load or relieve hydraulic pressure before
loosening fittings.
•
High-pressure oil can easily puncture skin, and can cause
serious injury, gangrene, or death.
•
If injured, seek emergency medical help. Immediate surgery
is required to remove oil.
