MAC215986
150
Revision A
1028898
A
B
B
Figure 3.197: Left Endsheet
12. Remove hairpin (A) securing the multi-tool to tool holder
bracket on the left endsheet.
13. Remove multi-tool (B), and reinstall the hairpin to the tool
holder.
1031617
A
B
Figure 3.198: Wing Unlocked Position
14. Unlock the wing you are checking by moving spring
handle (A) to the lower
(UNLOCK)
position. Unlock
ONLY
the wing you are checking. Ensure the opposite wing is
locked.
NOTE:
There should be an audible click when you move the spring
handle indicating that the internal mechanism engaged or
disengaged.
15. If the internal lock mechanism does not engage, move the
wing with multi-tool (B) until you hear an audible click.
1032839
B
A
x2
x2
Figure 3.199: Checker Plate Assembly
16. Ensure float checking toggles (A) are disengaged (down) on
both sides of the float module.
17. Ensure float locks (B) are engaged (up) on both sides of the
float module.
