MAC215986
62
Revision A
Detaching Header from FM200 Float Module
The FM200 Float Module attaches to the header, giving it the ability to closely follow ground contours. If necessary, the
FM200 can be disconnected from the header.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
1001215
Figure 3.59: Cutterbar Hazard
WARNING
Keep hands clear of the area between guards and knife at
all times.
WARNING
Wear heavy gloves when working around or handling knives.
1031942
A
B
Figure 3.60: Center-Link
1.
Start the engine, and then lower header.
2.
Increase clearance under the float module feed draper by
tilting the header and fully extending cylinder (A) until
indicator (B) is at position
E
.
3.
Raise the reel to its full height.
4.
Stop the engine, and then remove key from the ignition.
5.
Engage the reel safety props.
1029182
A
Figure 3.61: Wing Lock
–
Left Side Shown
6.
Move lever (A) to lock position to engage wing locks.