MAC215986
464
Revision A
4.15
Contour Wheels
–
Option
The ContourMax
™
Contour Wheels option allows the header to flex with the contours of the field leaving a consistent
stubble height while cutting up to 46 cm (18 in.) above the ground.
4.15.1
Leveling ContourMax
™
Wheel Height
The ContourMax
™
wheels allow the header to mirror the contours of the ground, and can be adjusted between 0 mm
(0 in.) and 457 mm (18 in.) from the ground surface.
DANGER
To avoid bodily injury or death from unexpected startup or fall of a raised machine, stop engine, remove key, and
engage lift cylinder lock-out valves before going under machine for any reason.
WARNING
Ensure that all bystanders have cleared the area.
NOTE:
The header float must be set before leveling the ContourMax
™
. For instructions refer to
NOTE:
The wing balance must be set before leveling the ContourMax
™
. For instructions refer to
3.9.4 Checking and Adjusting Wing
.
1.
Unlock the header wings. For instructions, refer to
Locking/Unlocking Header Wings, page 140
2.
Unlock the header float. For instructions refer to
Locking/Unlocking Header Float, page 140
3.
Start the engine. For instructions, refer to the combine operator
’
s manual.
4.
Park the combine on a level surface.
5.
Lower the reel fully.
ϭϬϯϴϯϬϲ
A
B
Figure 4.384: Height Indicator
–
Rear Left End
6.
Set ContourMax
™
wheel height indicator (A) to
number 2 (B).
