MAC215986
505
Revision A
Table 6.2
Troubleshooting
–
Cutting Action and Knife Components (continued)
Problem
Solution
Refer to
Worn knifehead pin
Replace the knifehead pin
•
4.8.3 Removing Knifehead Bearing,
page 333
and
•
4.8.4 Installing Knifehead Bearing,
page 334
Dull knife
Replace the knife
•
4.8.2 Removing Knife, page 331
and
•
4.8.5 Installing Knife, page 334
Knife speed too fast
Lower the knife speed
Consult your MacDon Dealer
Loose knife section hardware
Check/tighten all of the knife
hardware
—
