MAC215986
328
Revision A
WARNING
Ensure that all bystanders have cleared the area.
1.
Start the engine. For instructions, refer to the combine operator
’
s manual.
2.
Raise the reel fully.
3.
Engage the reel safety props. For instructions, refer to
Engaging Reel Safety Props, page 33
.
4.
Shut down the engine, and remove the key from the ignition.
1027650
A
C
D
B
D
Figure 4.108: Auger Tine Timing Indicator
5.
Locate finger timing indicator (C) at the end of the auger.
There are two auger tine extension positions: Position
A
and position
B
.
6.
Loosen nuts (D) and adjust finger timing indicator (C) to the
desired position.
IMPORTANT:
The timing indicator on both ends of the auger must be set
at the same position; if not, the auger will be damaged
beyond repair.
1026139
Figure 4.109: Auger Position A
NOTE:
If the finger timing indicator is pointing at position
A
, it
indicates that at that point the auger fingers will be fully
extended. This allows the crop to be engaged and released
earlier before entering the feeder house. This setting is best
used for canola or bushy crops.
