manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 87

65

3

3

Safety features of your vehicle

Air bag - supplemental restraint system

䳜 When children are seated in the 

rear outboard seats, they must 
be seated in the proper child 
restraint system. Make sure to 
position the child restraint sys

-

tem as far away from the door 
side as possible, and secure the 
child restraint system in a locked 
position.

䳜 Do not allow the passengers to 

lean their heads or bodies against 
doors, put their arms on the 
doors, stretch their arms out of 
the window or place objects 
between the doors and passen

-

gers when they are seated on 
seats equipped with side and cur

-

tain air bags.

䳜 Never try to open or repair any 

components of the side curtain air 
bag system. If necessary, have 
the system serviced by a profes

-

sional workshop. Kia recom

-

mends to visit an authorised Kia 
dealer/service partner.

Failure to follow the above instruc

-

tions can result in injury or death to 
the vehicle occupants in an accident.

Inflation and non-inflation condi

-

tions of the airbag 

There are many types of accidents 
in which the air bag would not be 
expected to provide additional pro

-

tection.

These include rear impacts, second 
or third collisions in multiple impact 
accidents, as well as low speed 
impacts.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands