manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 392

Driving your vehicle

70

6

Forward Collision䳍Avoidance Assist (FCA) (Front

view camera only)

Forward Collision䳍Avoidance 
Assist (FCA) (Front view camera 
only) (if equipped)

Basic function

Forward Collision-Avoidance Assist 
is designed to help detect and moni

-

tor the vehicle ahead or help detect 
a pedestrian in the roadway and 
warn the driver that a collision is 
imminent with a warning message 
and an audible warning, and if nec

-

essary, apply emergency braking.

NOTICE

FCA stands for Forward Collision-
Avoidance Assist.

Detecting sensor

[1]: Front view camera

Refer to the picture above for the 
detailed location of the detecting 
sensors.

CAUTION

Take the following precautions to 
maintain optimal performance of 
the detecting sensor:
䳜 Never disassemble the detecting 

sensor or sensor assembly, or 
apply any impact on it.

䳜 If the detecting sensors have 

been replaced or repaired, we rec

-

ommend that the vehicle be 
inspected by an authorised Kia 
dealer/service partner.

䳜 Never install any accessories or 

stickers on the front windscreen, 
or tint the front windscreen.

䳜 Pay extreme caution to keep the 

front view camera dry.

OBD051357

OBD051015R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands