manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 29

7

3

3

Safety features of your vehicle

Seats

Front seat adjustment - manual

Forward and backward

To move the seat forward or back

-

ward:
1. Pull the seat slide adjustment 

lever up and hold it.

2. Slide the seat to the position you 

desire.

3. Release the lever and make sure 

the seat is locked in place.

Adjust the seat before driving, and 
make sure the seat is locked 
securely by trying to move forward 
and backward without using the 
lever. If the seat moves, it is not 
locked properly.

Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up 

the seatback recline lever.

2. Carefully lean back on the seat 

and adjust the seatback of the 
seat to the position you desire.

3. Release the lever and make sure 

the seatback is locked in place. 
(The lever MUST return to its 
original position for the seatback 
to lock.)

Seat height (if equipped)

OBD031002R

OBD031003R

OBD031061R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands