manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 245

149

4

4

Features of your vehicle

Manual climate control system

Mode selection

The mode selection buttons control 
the direction of the air flow through 
the ventilation system.

Air can be directed to the floor, 
dashboard outlets, or windscreen. 
Five symbols are used to represent 
Face, Bi-Level, Floor, Floor-Defrost 
and Defrost air position.

 Face-Level (B, D, F)

Air flow is directed toward the 
upper body and face. Additionally, 
each outlet can be controlled to 
direct the air discharged from the 
outlet.

 Bi-Level (B, C, D, E, F)

Air flow is directed towards the face 
and the floor.

 Floor-Level (A, C, D, E, F)

Most of the air flow is directed to 
the floor, with a small amount of 
the air being directed to the 
windscreen, side window defrosters 
and side air vents.

 Floor/Defrost-Level (A, C, D, E, 

F)

Most of the air flow is directed to 
the floor and the windscreen with a 
small amount directed to the side 
window defrosters and side air 
vents.

 Defrost-Level (A, D)

Most of the air flow is directed to 
the windscreen with a small amount 
of air directed to the side window 
defrosters and side air vents.

OBD041303L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands