manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 259

163

4

4

Features of your vehicle

Windscreen defrosting and defogging

Defogging inside windscreen with 
automatic climate control

1. Set the fan speed to the desired 

position.

2. Select desired temperature.
3. Press the defroster button (

).

4. The outside (fresh) air position 

will be selected automatically and 
the air conditioning will turn on 
according to the detected ambi

-

ent temperature.

If the air conditioning and outside 
(fresh) air position are not selected 
automatically, adjust the corre

-

sponding button manually. If the 

 position is selected, lower fan 

speed is adjusted to a higher fan 
speed.

Defrosting outside windscreen with 
automatic climate control

1. Set the fan speed to the highest 

position.

2. Set the temperature to the 

extreme hot (HI) position.

3. Press the defroster button (

).

4. The outside (fresh) air position 

will be selected automatically and 
the air conditioning will turn on 
according to the detected ambi

-

ent temperature.

Auto defogging system (only for 
automatic climate control system)

Auto defogging helps reduce the 
possibility of fogging up the inside 
of the windscreen by automatically 
sensing the moisture on inside the 
windscreen.

OBD041325L

OBD041326L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands