manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 354

Driving your vehicle

32

6

Dual clutch transmission (DCT)

䳜 When in stop-and-go traffic on an 

incline, keep some distance ahead 
before moving the vehicle for

-

ward. Then hold the vehicle on the 
incline with the foot brake.

䳜 If the vehicle is held on a hill by 

applying the accelerator pedal or 
by creeping with brake pedal dis

-

engaged, the clutch and trans

-

mission may overheat which can 
result in damage. At this time, a 
warning message will appear on 
the LCD display.

䳜 If the LCD warning is active, the 

foot brake must be applied.

䳜 Ignoring the warnings can lead to 

damage to the transmission.

Transmission high temperature

䳜 Under certain conditions, such as 

repeated stop-and-go launches 
on steep grades, sudden take off 
or acceleration, or other harsh 
driving conditions, the transmis

-

sion clutch temperatures will 
increase excessively. Finally the 

clutch in transmission could be 
overheated.

䳜 When the clutch is overheated, 

the safe protection mode 
engages and the gear position 
indicator on the cluster blinks 
with a chime. At this time, "Trans

-

mission temp. is high! Stop safely" 
warning message will appear on 
the LCD display and driving may 
not be smooth.

䳜 If this occurs, pull over to a safe 

location, stop the vehicle with the 
engine running, apply the brakes 
and shift the vehicle to P (Park), 
and allow the transmission to 
cool.

䳜 If you ignore this warning, the 

driving condition may become 
worse. You may experience 
abrupt shifts, frequent shifts, or 
jerkiness. To return to the normal 
driving condition, stop the vehicle 
and apply the foot brake or shift 
into P (Park).
Then allow the transmission to 
cool for a few minutes with 
engine on, before driving off.

䳜 When possible, drive the vehicle 

smoothly.

OMQ4050283R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands