manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 406

Driving your vehicle

84

6

Forward Collision-Avoidance Assist (FCA) (Sensor

fusion)

Detecting sensor

[1]: Front view camera, [2]: Front radar

Refer to the picture above for the 
detailed location of the detecting 
sensors. 

CAUTION

Take the following precautions to 
maintain optimal performance of 
the detecting sensor:
䳜 Never disassemble the detecting 

sensor or sensor assembly, or 
apply any impact on it.

䳜 If the detecting sensor have been 

replaced or repaired have the 
vehicle inspected by a profes

-

sional workshop. Kia recom

-

mends to visit an authorised Kia 
dealer/service partner.

䳜 Never install any accessories or 

stickers on the front windscreen, 
or tint the front windscreen. 

䳜 Pay extreme caution to keep the 

front view camera dry.

䳜 Never place any reflective objects 

(i.e. white paper, mirror) over the 
dashboard. Any light reflection 
may prevent the function from 
functioning properly.

䳜 Do not apply license plate frame 

or objects, such as a bumper 
sticker, film or a bumper guard, 
near the front radar cover.

䳜 Always keep the front radar and 

cover clean and free of dirt and 
debris. Use only a soft cloth to 
wash the vehicle. Do not spray 
pressurized water directly on the 
sensor or sensor cover. 

䳜 If unnecessary force has been 

applied to the radar or around the 
radar, Forward Collision-Avoid

-

ance Assist may not properly 
operate even though a warning 
message does not appear on the 
cluster. In this case, have the 
vehicle inspected by a profes

-

sional workshop. Kia recom

-

mends to visit an authorised Kia 
dealer/service partner.

OBD051015R

OBD051014

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands