manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 197

101

4

4

Features of your vehicle

Warning and indicator lights

䳜 Whenever there is a malfunction 

with either the emission control 
system or the engine or the vehi

-

cle powertrain.
If this occurs, we recommend that 
you have the vehicle inspected by 
an authorised Kia dealer/service 
partner.

NOTICE

Driving with the Malfunction Indica

-

tor Lamp (MIL) on may cause dam

-

age to the emission control system 
which could affect drivability and/or 
fuel economy.

CAUTION

If the Malfunction Indicator Lamp 
(MIL) illuminates, potential catalytic 
converter damage is possible which 
could result in loss of engine power. 
In this case, we recommend that 
you have the vehicle inspected by an 
authorised Kia dealer/service part

-

ner as soon as possible.

Engine Oil Pressure Warning Light 

This warning light illuminates:

䳜 When the engine oil pressure is 

low.
- Drive carefully to the nearest 

safe location and stop your 
vehicle.

- Turn the engine off and check 

the engine oil level (For more 
details, refer to "Engine oil 
(Petrol)" on page 8-39). If the 
level is low, add oil as required.

- If the warning light remains on 

after adding oil or if oil is not 
available, have the vehicle 
inspected by a professional 
workshop as soon as possible. 
Kia recommends to visit an 
authorised Kia dealer/service 
partner.
Continued driving with the 
warning light on may cause 
engine failure.

- When engine oil pressure 

decreases due to insufficient 
engine oil, etc., the engine oil 
pressure warning light will illu

-

minate.

CAUTION

Engine Oil Pressure Warning Light

䳜 If the engine does not stop imme

-

diately after the Engine Oil Pres

-

sure Warning Light is illuminated, 
severe damage could result.

䳜 If the warning light stays on 

whilst the engine is running, it 
indicates that there may be seri

-

ous engine damage or malfunc

-

tion. In this case,
1. Stop the vehicle as soon as it is 

safe to do so.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands