manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 271

175

4

4

Features of your vehicle

Interior features

The temperature setting of the seat 
changes according to the button 
position.
䳜 To ventilate your seat cushion, 

press the button.
Each time you press the button, 
the airflow will change as follows:

The seat warmer (with air ventila

-

tion) defaults to the OFF position 
whenever the ignition switch or the 
ENGINE START/STOP Button is 
turned on.

CAUTION

Seat damage

䳜 When cleaning the seats, do not 

use an organic solvent such as 
paint thinner, benzene, alcohol 
and petrol. Doing so may damage 
the air ventilation seat.

Sun visor

Use the sun visor to shield direct 
light through the front or side win

-

dows.

䳜 To use the sun visor, pull it down

-

ward.

䳜 To use the sun visor for the side 

window, pull it downward, unsnap 
it from the bracket (1) and swing 
it to the side (2).

䳜 To use the vanity mirror, pull 

down the visor and slide the mir

-

ror cover (4).
Press the ON button (

) to turn 

on the lamp inside the sun visor 
when using a mirror. Before 
returning the sun visor to the 
original position, be sure to press 
the OFF button ( ) to turn it off.
The ticket holder (5) is provided 
for holding a tollgate ticket.

WARNING

For your safety, do not block your 
view when using the sun visor.

OMQ4040075R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands