manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 278

Features of your vehicle

182

4

Interior features

If necessary, Kia recommends to 
contact an authorised Kia dealer/
service partner.

CAUTION

To prevent damage to the goods or 
the vehicle, care should be taken 
when carrying fragile or bulky 
objects in the luggage compart

-

ment.

WARNING

Avoid eye injury. DO NOT over

-

stretch the luggage net, ALWAYS 
keep your face and body out of the 
luggage net's recoil path. DO NOT 
use when the strap has visible signs 
of wear or damage.

Cargo area cover (if equipped)

Use the cover to hide items stored in 
the cargo area.The cargo area cover 
will be lifted when the tailgate is 
opened. Disconnect the strap (1) 
from holder if you want to return 
the cover to original position. To 
remove the cargo area cover com

-

pletely, lift the cover to a 43- 
degree angle and pull it out to the 
full (2). For installation of the cover, 
reverse the removal procedure.

CAUTION

䳜 When you return the cargo area 

cover to its original position, hold 
the cover and lower it.

䳜 Do not operate the vehicle with 

the cover removed. It may dam

-

age to the cover.

䳜 The cargo area cover may be 

lifted when the tailgate is opened. 
Ensure that the luggage on the 
cover is moved to a safe place.

OBD041421L

OBD041423R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands