manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 550

What to do in an emergency

26

7

Towing

Emergency towing

Front

Rear(4Door)

Rear(5Door)

If towing is necessary, we recom

-

mend you to have it done by an 

authorised Kia dealer or a commer

-

cial tow truck service.

If towing service is not available in 
an emergency, your vehicle may be 
temporarily towed using a cable or 
chain secured to the emergency 
towing hook under the front (or 
rear) of the vehicle. Use extreme 
caution when towing the vehicle. A 
driver must be in the vehicle to 
steer it and operate the brakes.

Towing in this manner may be done 
only on hard-surfaced roads for a 
short distance and at low speed. 
Also, the wheels, axles, power train, 
steering and brakes must all be in 
good condition.
䳜 Do not use the tow hooks to pull a 

vehicle out of mud, sand or other 
conditions from which the vehicle 
cannot be driven out under its 
own power.

䳜 Avoid towing a vehicle heavier 

than the vehicle doing the towing.

䳜 The drivers of both vehicles 

should communicate with each 
other frequently.

CAUTION

䳜 Attach a towing strap to the tow 

hook.

䳜 Using a portion of the vehicle 

other than the tow hooks for 
towing may damage the body of 
your vehicle.

OBD061015

OBD061106

OBD061040

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands