manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 60

Safety features of your vehicle

38

3

Child restraint system (CRS)

䳜

Make sure the Child Restraint 
System is firmly secured.

 After 

installing a Child Restraint System 
to the vehicle, push and pull the 
seat forward and from side-to-
side to verify that it is securely 
attached to the seat. A Child 
Restraint System secured with a 
seat belt should be installed as 
firmly as possible. However, some 
side-toside movement can be 
expected.
When installing a Child Restraint 
System, adjust the vehicle seat 
and seatback (up and down, for

-

ward and rearward) so that your 
child fits in the Child Restraint 
System in a confortable manner.

䳜

Secure the child in the Child 
Restraint System.

 Make sure the 

child is properly strapped in the 
Child Restraint System according 
to the Child Restraint System 
manufacturer䳓s instructions.

CAUTION

A Child Restraint System in a closed 
vehicle can become very hot. To pre

-

vent burns, check the seating sur

-

face and buckles before placing your 
child in the Child Restraint System.

ISOFIX anchorage and top-tether 
anchorage (ISOFIX anchorage sys

-

tem) for children

The ISOFIX system holds a Child 
Restraint System during driving and 
in an accident. This system is 
designed to make installation of the 
Child Restraint System easier and 
reduce the possibility of improperly 
installing your Child Restraint Sys

-

tem. The ISOFIX system uses 
anchors in the vehicle and attach

-

ments on the Child Restraint Sys

-

tem. The ISOFIX system eliminates 
the need to use seat belts to secure 
the Child Restraint System to the 
rear seats.

ISOFIX anchorages are metal bars 
built into the vehicle. There are two 
lower anchors for each ISOFIX seat

-

ing position that will accommodate a 
Child Restraint System with lower 
attachments.

To use the ISOFIX system in your 
vehicle, you must have a Child 
Restraint System with ISOFIX 
attachments.

The Child Restraint System manu

-

facturer will provide you with 
instructions on how to use the Child 
Restraint System with its attach

-

ments for the ISOFIX anchorages.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands