manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 235

139

4

4

Features of your vehicle

Interior lights

- The map lamp and room lamp 

will go out immediately if the 
ignition switch or the ENGINE 
START/STOP Button is changed 
to the ON position or all doors 
are locked.

- To turn off the DOOR mode, 

press the DOOR button (2) once 
again (not pressed).

䳜

 (3): Press this switch to turn 

the front map lamps on.

䳜

 (4): Press this switch to turn 

the front map lamps off.

NOTICE

The DOOR mode and ROOM mode 
can not be selected at a time.

Room lamp

䳜

 : The light stays on at all 

times.

Trunk/tailgate room lamp

The trunk/tailgate room lamp 
comes on when the trunk (tailgate) 
is opened.

CAUTION

The trunk/tailgate room lamp 
comes on as long as the trunk (tail

-

gate) opens. To prevent unneces

-

sary charging system drain, close 
the trunk (tailgate) securely after 
using the trunk/tailgate room.

OSK3048007NR

OBD041420L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands