manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 179

83

4

4

Features of your vehicle

LCD display

Convenience (if equipped)

If the service interval is activated and the time and distance is adjusted, 
messages are displayed in the following situations each time the vehicle is 
turned on.
䳜 Service in: Displayed to inform the driver the remaining mileage and days 

to service.

䳜 Service required: Displayed when the mileage and days to service has 

been reached or passed.

If any of the following conditions occur, the mileage and number of days to 
service may be incorrect.
䳜 The battery cable is disconnected.
䳜 The battery is discharged.

Items

Explanation

Seat Easy Access (if 
equipped)

䳜 Off/Norma/Extended
To select the function.
* For more details, refer to "Driver position memory sys

-

tem (if equipped, for power seat)" on page 3-10.

Rear Occupant Alert (if 
equipped)

䳜 To activate or deactivate Rear Occupant Alert function.
* For more details, refer to "Rear Occupant Alert (ROA) 

system" on page 4-24.

Service Interval

䳜 Enable Service Interval : If this item is checked, the Ser

-

vice Interval function will be activated.

䳜 Adjust Interval : If the Service Interval menu is activated, 

you may adjust the time and distance.

䳜 Reset : To reset the Service Interval function.

Welcome Mirror/Light (if 
equipped)

䳜 To activate or deactivate the Welcome Mirror/Light 

function.

Wireless Charging Sys

-

tem (if equipped)

䳜 To activate or deactivate the Wireless Charging System 

function.

* For more details, refer to "Wireless smart phone charging 

system (if equipped)" on page 4-178.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands