manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 158

Features of your vehicle

62

4

Mirrors

lowing vehicles when changing 
lanes.

CAUTION

Do not scrape ice off the mirror 
face; this may damage the surface 
of the glass. If ice should restrict the 
movement of the mirror, do not 
force the mirror for adjustment. To 
remove ice, use a deicer spray, or a 
sponge or soft cloth with warm 
water.

CAUTION

If the mirror is jammed with ice, do 
not adjust the mirror by force. Use 
an approved spray de-icer (not radi

-

ator antifreeze) to release the fro

-

zen mechanism or move the vehicle 
to a warm place and allow the ice to 
melt.

WARNING

Do not adjust or fold the outside 
rear view mirrors whilst the vehicle 
is moving. This could result in loss of 
control, and an accident which could 
cause DEATH, SERIOUS INJURY, or 
property damage.

Adjusting the outside rear view 
mirrors

The electric remote control mirror 
switch allows you to adjust the 
position of the left and right outside 
rear view mirrors.

Adjusting the rear view mirrors:
1. Move the R or L switch (1) to 

select the right side mirror or the 
left side mirror.

2. Press a corresponding point (▲) 

on the mirror adjustment control 
(2) to position the selected mirror 
up, down, left or right.

CAUTION

䳜 The mirrors stop moving when 

they reach the maximum adjust

-

ing angles, but the motor contin

-

ues to operate whilst the switch is 
pressed. Do not press the switch 
longer than necessary, the motor 
may be damaged.

䳜 Do not attempt to adjust the out

-

side rear view mirror by hand. 
Doing so may damage the parts.

OBD041075R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands