Kia Cerato 2021 Manual Download Page 299

Page: 299 / 714

Infotainment system

1. Connect a device to the USB port

in your vehicle.
䳜 Playback may start immedi

ately depending on the device
that you connect to the sys

tem.

2. On the control panel, press the

[

MEDIA

] button.

3. When the mode selection window

displays, turn the [

TUNE

] knob to

select the desired mode and then
press the knob.

NOTICE

䳜 To start the media player, press

the [

MEDIA

] button on the control

panel.

䳜 You can also change the mode by

press the [

MODE

] button repeat

edly on the steering wheel.

䳜 Make sure to connect or discon

nect external USB devices with
the system power turned off.

䳜 When the Mode popup is not

selected in [

] ▶

Mode

popup

, press the [

MEDIA

] button

on the control panel to change the
media player.
Each time you press the [

MEDIA

]

button on the control panel, the
media mode switches to USB ▶
Bluetooth audio ▶ FM ▶ AM in
order.

䳜 Depending on vehicle models and

specifications, available buttons
or the appearance and layout of

the USB port in your vehicle may
vary.

䳜 Do not connect a smartphone or

an MP3 device to the system via
multiple methods such as USB,
Bluetooth simultaneously. Doing
so may cause a distorted noise or
a system malfunction.

䳜 When the equaliser function of

the connected device and

Equal

iser

(

Tone

) settings of the system

are both activated, the effects
may interfere with each other
and may lead to sound degrada

tion or distortion. Deactivate the
device䳓s equaliser function if pos

sible.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands