manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 118

Features of your vehicle

22

4

Keys

WARNING

Do not pull the inner door handle of 
driver's (or passenger's) door whilst 
the vehicle is moving.

With central door lock/unlock 
switch

Driver side

1. Door Lock
2. Door Unlock

Operate by pressing the central 
door lock/unlock switch.
䳜 Press the switch to the "Lock" 

position (1), all vehicle doors will 
lock.

䳜 Press the switch to the "Unlock" 

position (2), all vehicle doors will 
unlock.

䳜 If the key is in the ignition switch 

(of if the smart key is in the vehi

-

cle) and any front door is opened, 
the doors will not lock when the 
"Lock" position (1) of the central 
door lock/unlock switch is 
pressed.

WARNING

Doors

䳜 The doors should always be fully 

closed and locked whilst the vehi

-

cle is in motion to prevent acci

-

dental opening of the door. 
Locked doors will also discourage 
potential intruders when the 
vehicle stops or slows down.

䳜 Be careful when opening doors 

and watch for vehicles, motorcy

-

cles, bicycles or pedestrians 
approaching the vehicle in the 
path of the door. Opening a door 
when something is approaching 
can cause damage or injury.

WARNING

Unlocked vehicles

Leaving your vehicle unlocked can 
invite theft or possible harm to you 
or others from someone hiding in 
your vehicle whilst you are gone. 
Always remove the ignition key, 
engage the parking brake, close all 
windows and lock all doors when 
leaving your vehicle unattended.

WARNING

Unattended children

An enclosed vehicle can become 
extremely hot, causing death or 
severe injury to unattended chil

-

dren or animals who cannot escape 

OBD041037R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands