manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 383

61

6

6

Driving your vehicle

Brake system

When operating

When the ESC is in operation, 
the ESC indicator light blinks.
䳜When the Electronic Stability 

Control is operating properly, you 
can feel a slight pulsation in the 
vehicle. This is only the effect of 
brake control and indicates noth

-

ing unusual.

䳜 When moving out of the mud or 

driving on a slippery road, the 
engine rpm (revolution per min

-

ute) may not be increased even if 
you press the accelerator pedal 
deeply. This is to maintain the 
stability and traction of the vehi

-

cle and does not indicate a prob

-

lem.

ESC OFF condition

To cancel ESC operation :
䳜State 1

Press the ESC OFF button shortly 
(ESC OFF indicator light and mes

-

sage illuminates). At this state, 
the engine control function does 

not operate. In other words, the 
traction control function does not 
operate but only the brake control 
function operates.

䳜 State 2

Press the ESC OFF button for 
more than 3 seconds. ESC OFF 
indicator light and message illu

-

minates and ESC OFF warning 
chime will sound. At this state, 
the engine control function and 
brake control function does not 
operate. In other words, the vehi

-

cle stability control function does 
not operate any more.
If the ignition switch or ENGINE 
START/STOP button is placed to 
the LOCK/OFF position when ESC 
is off, ESC remains off. Upon 
restarting the engine, the ESC will 
automatically turn on again.

OMQ4050059R

OMQ4050060R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands