Kia Cerato 2021 Manual Download Page 107

Page: 107 / 714

Features of your vehicle

Keys

Type A

Type B

Type C

Lock (1)

All doors are locked if the lock button
is pressed whilst all doors are closed.

The hazard warning lights will blink
once to indicate that all doors are
locked.

However, if any door, engine bonnet
or trunk/tailgate remains open, the
hazard warning lights will not oper

ate. If all doors, engine bonnet and
trunk/tailgate are closed after the
lock button is pressed, the hazard
warning lights will blink once.

Unlock (2)

All doors are unlocked if the unlock
button is pressed.

The hazard warning lights will blink
twice to indicate that all doors are
unlocked.

After pressing this button, the doors
will lock automatically unless you
open any door within 30 seconds.

When 2 Press Unlock function (if
equipped) is activated,
䳜 If you press the Unlock button (2)

on the smart key, the driver's
door will unlock.

䳜 If you press the Unlock button (2)

on the smart key within four sec

onds again, then all the doors will
unlock.

You can activate or deactivate the 2
Press Unlock function by selecting

OBD041571L

OBD041572L

OBD041620L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands