manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 314

Infotainment system

34

5

Infotainment system

NOTICE

䳜 If the caller information is saved in 

your contacts list, the caller䳓s 
name and phone number will be 
displayed. If the caller information 
is not saved in your contacts list, 
only the caller䳓s phone number 
will be displayed.

䳜 You cannot switch to any other 

screen, such as the audio screen 
or the settings screen, during a 
Bluetooth call.

䳜 Depending on the mobile phone 

type, call quality may vary. On 
some phones, your voice may be 
less audible to the other party.

䳜 Depending on the mobile phone 

type, the phone number may not 
be displayed.

䳜 Depending on the mobile phone 

type, the call switching function 
may not be supported.

ERA-GLONASS EMERGENCY CALL 
(if equipped)

The system ERA-GLONASS is an 
automatic emergency call service 
made in event of a traffic accident 
or other accidents on the roads.

SOS

Driver or passenger manually can 
make an emergency call in the single 
duty dispatch service, by pressing 
SOS button to call the necessary 
emergency services.
䳜 Stops sound and SOS is displayed 

on screen.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands