manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 513

191

6

6

Driving your vehicle

Trailer Towing

bumper-type hitches to them. 
Use only a frame-mounted hitch 
that does not attach to the 
bumper.

䳜 Any part of the rear number plate 

or lighting devices of the vehicle 
must not be obscured by the 
mechanical coupling device.
If the rear number plate and/or 
lighting devices can be obscured 
partially by any part of the 
mechanical coupling device, 
mechanical coupling devices that 
can not be easily removed or 
repositioned without use of any 
tools, except an easily operated 
(i.e. an effort not exceeding 
20Nm) release key which is sup

-

plied by the manufacturer of the 
coupling device, are not permitted 
for use. 
Please note that the mechanical 
coupling device that is fitted and 
not in use must always be 
removed or repositioned if the 
rear number plate and/or rear 
lighting devices are obscured by 
any part of the mechanical cou

-

pling device.

䳜 Kia trailer hitch accessory is avail

-

able at an authorised Kia dealer/
service partner.

Safety chains

You should always attach chains 
between your vehicle and your 
trailer. Cross the safety chains 
under the tongue of the trailer so 
that the tongue will not drop to the 
road if it becomes separated from 
the hitch.

Instructions about safety chains 
may be provided by the hitch manu

-

facturer or by the trailer manufac

-

turer. Follow the manufacturer䳓s 
recommendation for attaching 
safety chains. Always leave just 
enough slack so you can turn with 
your trailer. And, never allow safety 
chains to drag on the ground.

Trailer brakes

If your trailer is equipped with a 
braking system, make sure it con

-

forms to your country䳓s regulations 
and that it is properly installed and 
operating correctly.

If your trailer weight exceeds the 
maximum allowed weight without 
trailer brakes, then the trailer will 
also require its own brakes as well. 
Be sure to read and follow the 
instructions for the trailer brakes so 
you䳓ll be able to install, adjust and 
maintain them properly.
䳜 Do not tap into or modify your 

vehicle's brake system.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands