manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 149

53

4

4

Features of your vehicle

Sunroof

NOTICE

Do not pull the sunshade up or 
down, or apply excessive force as 
such action may damage the sun

-

shade or cause it to malfunction.

Tilt open/close

䳜 Push the sunroof switch upward, 

the sunroof glass tilts open. 

䳜 Push the sunroof switch forward, 

the sunroof glass automatically 
close.

To stop the sunroof movement at 
any point, push the sunroof switch 
in any direction.

NOTICE

The sunroof glass cannot slide open 
and tilt open at the same time. You 
cannot tilt the sunroof glass open 
whilst the sunroof glass is slide 
open. Also, you cannot slide the 
sunroof glass open whilst the sun

-

roof is tilt open. Slide open or tilt 

open the sunroof glass when the 
sunroof glass is completely closed.

Slide open/close

䳜 Push the sunroof switch rear

-

ward, the sunshade and sunroof 
glass slide open. 
Push the sunroof switch forward, 
only the sunroof glass close.

䳜 Push the sunroof switch forward 

or rearward to the first detent 
position, the sunroof glass moves 
until the switch is released.

䳜 Push the sunroof switch forward 

or rearward to the second detent 
position, the sunroof glass oper

-

ates automatically (auto slide 
feature).
To stop the sunroof movement at 
any point, push the sunroof 
switch in any direction.

OBD041064

OBD041063

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands