manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 529

5

7

7

What to do in an emergency

If the engine will not start

If the engine will not start

If engine doesn't turn over or turns 
over slowly

1. If your vehicle has automatic 

transmission/dual clutch trans

-

mission, be sure the shift lever is 
in N (Neutral) or P (Park) and the 
emergency brake is set.

2. Check the battery connections to 

be sure they are clean and tight.

3. Turn on the interior light. If the 

light dims or goes out when you 
operate the starter, the battery is 
discharged.

4. Check the starter connections to 

be sure they are securely tight

-

ened.

5. Do not push or pull the vehicle to 

start it. See instructions for 
"Jump starting".

WARNING

If the engine will not start, do not 
push or pull the vehicle to start it. 
This could result in a collision or 
cause other damage. In addition, 
push or pull starting may cause the 
catalytic converter to be overloaded 
and create a fire hazard.

If engine turns over normally but 
does not start

1. Check the fuel level.
2. With the ignition switch or 

ENGINE START/STOP button in 
the LOCK/OFF position, check all 
connectors at the ignition coils 
and spark plugs. Reconnect any 
that may be disconnected or 
loose.

3. Check the fuel line in the engine 

compartment.

4. If the engine still does not start, 

call a professional workshop. Kia 
recommends to call an authorised 
Kia dealer/service partner.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands