manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 335

13

6

6

Driving your vehicle

ENGINE START/STOP button

ENGINE START/STOP button (if 
equipped)

Illuminated ENGINE START/STOP 
button (if equipped)

Whenever the front door is opened, 
the ENGINE START/STOP button will 
illuminate for your convenience. The 
light will go off after about 30 sec

-

onds when the door is closed. It will 
also go off immediately when the 
theft-alarm system is armed.

ENGINE START/STOP button posi

-

tion

OFF 

With Manual Transmission

To turn off the engine (START/RUN 
position) or vehicle power (ON posi

-

tion), stop the vehicle then press the 
ENGINE START/STOP button.

With Automatic Transmission / 
Dual Clutch Transmission

To turn off the engine (START/RUN 
position) or vehicle power (ON posi

-

tion), press the ENGINE START/
STOP button with the shift lever in 
the P (Park) position. When you 
press the ENGINE START/STOP but

-

ton without the shift lever in the P 
(Park) position, the ENGINE START/
STOP button will not change to the 
OFF position but to the ACC position.

Vehicles equipped with anti-theft 
steering column lock

The steering wheel locks when the 
ENGINE START/STOP button is in 
the OFF position to protect you 
against theft. It locks when the door 
is opened.
If the steering wheel is not locked 
properly when you open the driver's 
door, the warning chime will sound. 
Try locking the steering wheel again. 
If the problem is not solved, have 
the system checked by a profes

-

sional workshop. Kia recommends to 
visit an authorised Kia dealer/ser

-

vice partner.
In addition, if the ENGINE START/
STOP button is in the OFF position 
after the driver's door is opened, the 
steering wheel will not lock and the 
warning chime will sound. In such a 
situation, close the door. Then the 
steering wheel will lock and the 
warning chime will stop.

OBD051001R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands