manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 604

Maintenance

50

8

Air cleaner

3. Replace the air cleaner filter.
4. Lock the cover with the cover 

attaching clips. 

NOTICE

Insert the hinge(1) and engage the 
clips when mounting the air cleaner 
cover. 

Replace the filter according to the 
Maintenance Schedule.

If the vehicle is operated in 
extremely dusty or sandy areas, 
replace the element more often 
than the usual recommended inter

-

vals. (Refer to "Scheduled mainte

-

nance service" on page 8-11.)

CAUTION

䳜 Do not drive with the air cleaner 

removed; this will result in exces

-

sive engine wear.

䳜 When removing the air cleaner fil

-

ter, be careful that dust or dirt 
does not enter the air intake, or 
damage may result.

䳜 Use parts for replacement from a 

professional workshop. Kia rec

-

ommends to visit an authorised 
Kia dealer/service partner.

OBD071011

OBD078068

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands