Kia Cerato 2021 Manual Download Page 538

Page: 538 / 714

What to do in an emergency

If you have a flat tyre (with spare tyre)

- TPMS related parts : tyre,

wheel, ABS unit, suspension

WARNING

FOR EUROPE

Do not modify the vehicle. It may
interfere with the TPMS function.
* All vehicles sold in the EUROPE

market during below period must
be equipped with TPMS.

䳜 New model vehicle : Nov. 1, 2012 ~
䳜 Current model vehicle : Nov. 1,

2014~(Based on vehicle registra

tions)

Reference : Indicator Light Status

If you have a flat tyre (with
spare tyre) (if equipped)

Jack and tools

The jack, jack handle, wheel lug nut
wrench, towing hook are stored in
the luggage compartment.

4Door

5Door

Pull up the luggage box cover to
reach this equipment.
1. Jack handle
2. Jack
3. Wheel lug nut wrench
4. Screw driver

Status

Symbol

Low Pres

sure

Illuminates

System Mal

function

▶

Illuminates after blink

ing (60 seconds)

Setting

▶

Turns off after blink

ing(4seconds)

OBD061023L

OBD061038L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands