manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 124

Features of your vehicle

28

4

Safe Exit Warning (SEW)

Function operation

Function warning

Collision warning when exiting vehi

-

cle

䳜 When an approaching vehicle 

from the rear is detected at the 
moment a door is opened, the 
'Watch out for traffic' warning 
message will appear on the clus

-

ter, the warning light will illumi

-

nate on the outside rear view 
mirror and an audible warning will 
sound.

䳜 Safe Exit Warning will warn the 

driver when your vehicle speed is 
below 3km/h (2mph), and the 
speed of the approaching vehicle 
from the rear is above 6 km/h (4 
mph).

WARNING

䳜 For your safety, change the Set

-

tings after parking the vehicle at a 
safe location.

䳜 If any other function's warning 

message is displayed or audible 
warning is generated, Safe Exit 
Warning message may not be dis

-

played and audible warning may 
not be generated.

䳜 You may not hear the warning 

sound of Safe Exit Warning if the 
surrounding is noisy.

䳜 Safe Exit Warning does not oper

-

ate in all situations or cannot pre

-

vent all collisions.

䳜 Safe Exit Warning may warn the 

driver late or may not warn the 
driver depending on the road and 
driving conditions. Always check 
vehicle surroundings.

䳜 Safe Exit Warning does not oper

-

ate if there is a problem with 
Blind-Spot Safety system.
- The warning message of Blind-

Spot Safety system will appear 
when:

- The warning message of Blind-

Spot Safety system appears on 
the cluster.

OUM054028

OBD041637R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands