manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 382

Driving your vehicle

60

6

Brake system

WARNING

Never drive too fast for the road 
conditions or too quickly when cor

-

nering. Electronic Stability Control 
(ESC) will not prevent accidents. 
Excessive speed in turns, abrupt 
manoeuvres and hydroplaning on 
wet surfaces can still result in seri

-

ous accidents. Only a safe and 
attentive driver can prevent acci

-

dents by avoiding manoeuvres that 
cause the vehicle to lose traction. 
Even with ESC installed, always fol

-

low all the normal precautions for 
driving - including driving at safe 
speeds for the conditions.

The Electronic Stability Control (ESC) 
system is an electronic system 
designed to help the driver maintain 
vehicle control under adverse condi

-

tions. It is not a substitute for safe 
driving practices. Factors including 
speed, road conditions and driver 
steering input can all affect whether 
ESC will be effective in preventing a 
loss of control. It is still your respon

-

sibility to drive and corner at reason

-

able speeds and to leave a sufficient 
margin of safety.

When you apply your brakes under 
conditions which may lock the 
wheels, you may hear a 䳖tik-tik䳓䳓 
sound from the brakes, or feel a 
corresponding sensation in the 

brake pedal. This is normal and it 
means your ESC is active.

NOTICE

A click sound may be heard in the 
engine compartment when the 
vehicle begins to move after the 
engine is started. These conditions 
are normal and indicate that the 
Electronic Stability Control System 
is functioning properly.

ESC operation

ESC ON condition

䳜 When the ignition switch or 

ENGINE START/STOP button is 
turned ON, ESC and ESC OFF indi

-

cator lights illuminate for approxi

-

mately 3 seconds, then ESC is 
turned on.

䳜 Press the ESC OFF button after 

turning the ignition switch or 
ENGINE START/STOP button ON 
to turn ESC off. (ESC OFF indicator 
will illuminate). To turn the ESC 
on, press the ESC OFF button (ESC 
OFF indicator light will go off).

䳜 When starting the engine, you 

may hear a slight ticking sound. 
This is the ESC performing an 
automatic system self-check and 
does not indicate a problem.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands