manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 131

35

4

4

Features of your vehicle

Smart Trunk(For 4door)

2. Detect and Alert

If you are positioned in the 
detecting area (50 ~100 cm 
behind the vehicle) carrying a 
smart key, the hazard warning 
lights will blink and chime will 
sound to alert you the smart key 
has been detected and the trunk 
will open.

NOTICE

Do not approach the detecting area 
if you do not want the trunk to 
open. If you have unintentionally 
entered the detecting area and the 
hazard warning lights and chime 
starts to operate, leave the detect

-

ing area with the smart key. The 
trunk will stay closed.

3. Automatic opening

The hazard warning lights will 
blink and chime will sound 2 times 
and then the trunk will open.

WARNING

䳜 Make sure you close the trunk 

before driving your vehicle.

䳜 Make sure there are no people or 

objects around the trunk before 
opening or closing the trunk.

䳜 Make sure objects in the trunk do 

not come out when opening the 
trunk on a slope. It may cause 
serious injury.

䳜 Make sure to deactivate the 

Smart Trunk  when washing your 
vehicle. Otherwise, the trunk may 
open inadvertently.

䳜 The key should be kept out of 

reach of children. Children may 
inadvertently open the Smart 
Trunk whilst playing around the 
rear area of the vehicle.

OBD041043

OBD041044

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands