manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 148

Features of your vehicle

52

4

Sunroof

Sunroof (if equipped)

If your vehicle is equipped with a 
sunroof, you can slide or tilt your 
sunroof with the sunroof switch 
located on the overhead console.

The sunroof can only be operated 
when the ignition switch or the 
ENGINE START/STOP button is in 
the ON or START position.

The sunroof can be operated for 
approximately 3 minutes after the 
ignition switch or the ENGINE 
START/STOP button is in the ACC or 
LOCK/OFF position. However, if the 
front door is open, the sunroof can

-

not be operated even within the 3 
minutes period.

WARNING

䳜 Never adjust the sunroof or sun

-

shade whilst driving. This could 
result in loss of control and an 
accident that may cause injury, or 
property damage.

䳜 Do not leave the engine running 

and the key in your vehicle with 
unsupervised children. Unat

-

tended children could operate the 
sunroof, which could result in 
serious injury.

䳜 Do not sit on the top of the vehi

-

cle. It may cause injury or vehicle 
damage.

Sunshade

Use the sunshade to block direct 
sunlight coming through the sun

-

roof glass.

Open or close the sunshade by hand.

NOTICE

The sunshade opens automatically 
when the sunroof glass is opened, 
but the sunshade does not close 
automatically when the sunroof 
glass is closed. Also, only the sun

-

shade cannot be closed when the 
sunroof glass is opened.

OBD041054

OBD041544

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands