Kia Cerato 2021 Manual Download Page 168

Page: 168 / 714

Features of your vehicle

Instrument cluster

The temperature unit (from C to F
or from F to C) can be changed by:
䳜 Type A Cluster

Press the TRIP button for 5 seconds,
the Fuel Economy unit is blink. Press
the TRIP button again, the tempera

ture unit is blink. And then press the
RESET button, the temperature unit
is changed. Press the TRIP button for
more than one second.

䳜 Type B Cluster

- User Settings mode in the Clus

ter (if equipped) : You can
change the temperature unit in
the 䳖Other - Temperature unit䳗.
* For more details, refer to "LCD

display" on page 4-75.

- Settings menu in the Infotain

ment System screen (if
equipped) : You can change the
temperature unit in the 䳖Set

tings → Vehicle → Unit → Tem

perature unit → C/ F䳗.
* For detailed information, scan

the QR code in a separately sup

plied Car Infotainment System
Quick Reference Guide.

- Climate control system (for

Automatic climate control sys

tem): whilst pressing the OFF
button, press the AUTO button
for 3 seconds or more. The
temperature unit of the instru

ment cluster and climate con

trol system will change at once.

Transmission Shift Indicator

Intelligent variable transmission
Shift indicator (if equipped)

This indicator displays which auto

matic transmission shift lever is
selected.

Type A

Type B

䳜 Park: P
䳜 Reverse: R
䳜 Neutral: N
䳜 Drive: D
䳜 Sports Mode: 1, 2, 3, 4, 5, 7, 8

OBD041609L

OBD041624L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands