Kia Cerato 2021 Manual Download Page 36

Page: 36 / 714

Safety features of your vehicle

Seats

Type B

To reinstall the headrest:
1. Put the headrest poles (2) into

the holes whilst pressing the
release button or switch (1).

2. Recline the seatback(4) with the

recline lever or switch (3).

3. Adjust the headrest to the appro

priate height.

WARNING

Always make sure the headrest
locks into position after reinstalling
and adjusting it properly.

Seatback pocket (if equipped)

The seatback pocket is provided on
the back of the front passenger䳓s
seatbacks.

WARNING

Seatback pockets

Do not put heavy or sharp objects in
the seatback pockets. In an accident
they could come loose from the
pocket and injure vehicle occupants.

Rear seat adjustment

Headrest (if equipped)

OBD031013R

OBD031015R

OBD031211L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands