manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 334

Driving your vehicle

12

6

Key positions

CAUTION

Do not turn the engine off immedi

-

ately after it has been subjected to 
a heavy load. Doing so may cause 
severe damage to the engine or tur

-

bocharger unit. 

CAUTION

If the engine stalls whilst you are in 
motion, do not attempt to move the 
shift lever to the P (Park) position. If 
traffic and road conditions permit, 
you may put the shift lever in the N 
(Neutral) position whilst the vehicle 
is still moving and turn the ignition 
switch to the START position in an 
attempt to restart the engine.

CAUTION

䳜 Do not engage the starter for 

more than 10 seconds. If the 
engine stalls or fails to start, wait 
5 to 10 seconds before reengag

-

ing the starter. Improper use of 
the starter may damage it.

䳜 Do not turn the ignition switch to 

the START position with the 
engine running. It may damage 
the starter.

Stopping the engine

Manual Transmission

1. Make sure the vehicle is com

-

pletely stopped and keep the 
clutch pedal and brake pedal 
depressed.

2. Shift the transmission into Neu

-

tral whilst depressing the clutch 
pedal and brake pedal.

3. Engage the parking brake whilst 

depressing the brake pedal.

4. Turn the ignition key to the LOCK 

position and remove it.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands