Kia Cerato 2021 Manual Download Page 447

Page: 447 / 714

125

Driving your vehicle

Driver Attention Warning (DAW)

Taking a break

䳜 The 'Consider taking a break'

message will appear on the clus

ter and an audible warning will
sound to suggest that the driver
take a break, when the driver's
attention level is below 1.

䳜 Driver Attention Warning will not

suggest a break when the total
driving time is shorter than 10
minutes or 10 minutes has not
passed after the last break was
suggested.

WARNING

For your safety, change the settings
after parking the vehicle at a safe
location.

CAUTION

䳜 Driver Attention Warning may

suggest a break depending on the
driver's driving pattern or habits,
even if the driver doesn't feel
fatigue.

䳜 Driver Attention Warning is a sup

plemental function and may not
be able to determine whether the
driver is inattentive.

䳜 The driver who feels fatigued

should take a break at a safe
location, even though there is no
break suggestion by Driver Atten

tion Warning.

NOTICE

䳜 For more details on setting the

functions in the infotainment
system, refer to "Instrument
cluster" on page 4-65.

䳜 Driver Attention Warning will

reset the last break time to 00:00
in the following situations:
- The engine is turned off
- The driver unfastens the seat

belt and opens the driver's door.

- The vehicle is stopped for more

than 10 minutes.

䳜 When the driver resets Driver

Attention Warning, the last break
time is set to 00:00 and the
driver's attention level is set to
High.

OBD041241R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands