Kia Cerato 2021 Manual Download Page 294

Page: 294 / 714

Infotainment system

Numberless items

Turn the [

TUNE

] knob to select the

desired item, and then press the
knob to select the item.

Adjusting the settings

Turn the [

TUNE

] knob to adjust the

value, and then press the knob to
save changes.

Turn the [

TUNE

] knob to the right to

increase the value and turn the
[

TUNE

] knob to the left to decrease

the value.

Radio

Turning on the radio

1. On the control panel, press the

[

RADIO

] button.

2. When the mode selection window

displays, turn the [

TUNE

] knob to

select the desired radio mode and
then press the knob.

FM/AM Mode

1. Current radio mode
2. Radio station information
3. Preset list

Press the [

] button on the

control panel to access the following
menu options:
䳜

Autostore

: Save radio stations to

the preset list.

䳜

Scan

: The system searches for

radio stations with strong radio
signals and plays each radio sta

tion for about five seconds.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands