manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 649

95

8

8

Maintenance

Light bulbs

Position lamp/Daytime running 
lamp (LED type) bulb replacement - 
Headlamp Type A

If the position lamp/daytime run

-

ning lamp (LED) (1) does not oper

-

ate, have your vehicle checked by a 
professional workshop.

Kia recommends to visit an 
authorised Kia dealer/service part

-

ner.

The LED lamps cannot be replaced 
as a single unit because it is an inte

-

grated unit. The LED lamps has to 
be replaced with the unit.

A skilled technician should check or 
repair the position lamp/daytime 
running lamp (LED), for it may dam

-

age related parts of the vehicle.

Headlamp (LED type) bulb replace

-

ment - Headlamp Type B

If the Low beam lamp (1), High 
beam lamp (2), Front turn signal 
lamp(3), Day time running lamp/
Position lamp(4) does not operate, 
have your vehicle checked by a pro

-

fessional workshop.

Kia recommends to visit an 
authorised Kia dealer/service part

-

ner.

The LED lamps cannot be replaced 
as a single unit because it is an inte

-

grated unit. The LED lamps has to 
be replaced with the unit.

A skilled technician should check or 
repair the head lamp (LED), for it 
may damage related parts of the 
vehicle.

OBD071028L

OBD071210

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands