Kia Cerato 2021 Manual Download Page 150

Page: 150 / 714

Features of your vehicle

Sunroof

NOTICE

To reduce wind noise whilst driving,
we recommend that you drive at
the recommended position before
the maximum slide open position.

Automatic reversal

If the sunroof glass senses any
obstacle whilst it is closing auto

matically, it will reverse direction
then stop at a certain position.

The auto reverse function may not
work if an object thin or soft is
caught between the sliding sunroof
glass and sunroof sash.

WARNING

䳜 Make sure heads, hands, arms or

any other body parts or objects
are out of the way before operat

ing the sunroof. Body parts or
objects may get caught causing
injuries or vehicle damage.

䳜 Never deliberately use your body

parts to test the automatic rever

sal function. The sunroof glass
may reverse direction, but there is
a risk of injury.

NOTICE

䳜 Do not continue to push the sun

roof switch after the sunroof is
fully opened, closed, or tilted.
Damage to the sunroof motor
could occur.

䳜 Continuous operations such as

slide open/close, tilt open/close,
etc. may cause the motor or sun

roof system to malfunction.

䳜 Regularly remove any accumu

lated dust on the sunroof rail.

䳜 Using the sunroof for a long time

can make noise caused by dust in
accumulated between the sun

roof and vehicle body.
Open the sunroof and remove
dust regularly using a clean cloth.

䳜 Do not try to open the sunroof

when the temperature is below
freezing or when the sunroof is
covered with snow or ice, other

wise the motor could be dam

aged. In cold and wet climates, the
sunroof may not work properly.

䳜 Do not open or drive with the

sunroof glass open immediately
after rain or washing the vehicle.
Water may wet the interior of the
vehicle.

OBD041542

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands