manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 193

97

4

4

Features of your vehicle

Warning and indicator lights

Warning and indicator lights

The warning light and indicator light 
indicate a situation where the driver 
should be careful and whether the 
various functions are activated.

Warning lights

The warning light indicates situa

-

tions that require the driver to pay 
attention.

NOTICE

Warning lights

Make sure that all warning lights are 
OFF after starting the engine. If any 
light is still ON, this indicates a situ

-

ation that needs attention.

Air bag warning light 

 (if 

equipped)

This warning light illuminates:

䳜 Once you set the ignition switch 

or the ENGINE START/STOP but

-

ton to the ON position.
- It illuminates for approximately 

6 seconds and then goes off.

䳜 When there is a malfunction with 

the SRS.
In this case, have the vehicle 
inspected by a professional work

-

shop. Kia recommends to visit an 
authorised Kia dealer/service 
partner.

Seat belt warning light 

This warning light informs the 
driver that the seat belt is not fas

-

tened.

* For more details, refer to "Seat 

belts" on page 3-19.

Parking brake & brake fluid warning 
light 

This warning light illuminates:

䳜 Once you set the ignition switch 

or ENGINE START/STOP button to 
the ON position.
- It illuminates for approximately 

3 seconds

- It remains on if the parking 

brake is applied.

䳜 When the parking brake is applied.
䳜 When the brake fluid level in the 

reservoir is low.
- If the warning light illuminates 

with the parking brake 
released, it indicates the brake 
fluid level in reservoir is low.

If the brake fluid level in the reser

-

voir is low:

1. Drive carefully to the nearest safe 

location and stop your vehicle.

2. With the engine stopped, check 

the brake fluid level immediately 

Type A

Type B

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands