Kia Cerato 2021 Manual Download Page 130

Page: 130 / 714

Features of your vehicle

Smart Trunk(For 4door)

Smart Trunk(For 4door) (if
equipped)

On a vehicle equipped with a smart
key, the trunk can be opened using
the Smart Trunk system.

How to use the Smart Trunk

The trunk can be opened with no-
touch activation satisfying all the
conditions below.
䳜 After 15 seconds when all doors

are closed and locked

䳜 Positioned in the detecting area

for more than 3 seconds.

NOTICE

The Smart Trunk does not operate
when:
䳜 The smart key is detected within

15 seconds after the doors are
closed and locked, and is continu

ously detected.

䳜 The smart key is detected within

15 seconds after the doors are
closed and locked, and 1.5 m from
the front door handles. (for vehi

cles equipped with Welcome
Light)

䳜 A door is not locked or closed.
䳜 The smart key is in the vehicle.

1. Setting

You can activate or deactivate the
Smart Trunk by selecting 'User
Settings (LCD display) or Settings

→ Vehicle (Infotainment System

screen) → Door → Smart Trunk'.

OBD041042

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands