manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 347

25

6

6

Driving your vehicle

Automatic transmission

䳜 Never leave a child unattended in 

a vehicle.

CAUTION

The transmission may be damaged 
if you shift into P (Park) whilst the 
vehicle is in motion.

R (Reverse)

Use this position to drive the vehicle 
backward.

CAUTION

Always come to a complete stop 
before shifting into or out of R 
(Reverse); you may damage the 
transmission if you shift into R 
whilst the vehicle is in motion, 
except as explained in "Rocking the 
vehicle" on page 6-191.

N (Neutral)

The wheels and transmission are 
not engaged. The vehicle will roll 
freely even on the slightest incline 
unless the parking brake or service 
brakes are applied.

WARNING

Do not drive with the shift lever in N 
(Neutral).

The engine brake will not work and 
lead to an accident.

D (Drive)

This is the normal forward driving 
position. The transmission will auto

-

matically shift through a 6-gear 
sequence, providing the best fuel 
economy and power.

For extra power when passing 
another vehicle or climbing grades, 
depress the accelerator pedal fully, 
at which time the transmission will 
automatically downshift to the next 
lower gear.

NOTICE

Always come to a complete stop 
before shifting into D (Drive).

Manual mode

Whether the vehicle is stationary or 
in motion, manual mode is selected 
by pushing the shift lever from the 

OBD051007R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands