Kia Cerato 2021, Manual

Page: 292 / 714

Infotainment system
12 5
Infotainment system
CAUTION
About handling the system
䳜 Do not apply excessive force to
the system. Excessive pressure
on the screen may damage the
LCD panel or the touch panel.
䳜 When cleaning the screen or but -
ton panel, make sure to stop the
engine and use a soft, dry cloth.
Wiping the screen or buttons with
a rough cloth or using solvents
(alcohol, benzene, paint thinner,
etc.) may scratch or chemically
damage the surface.
䳜 If you attach a liquid-type air
freshener to the fan louvre, the
surface of the louvre may become
deformed due to the flowing air.
䳜 If you want to change the position
of the installed device, please
inquire with your place of pur
-
chase or service maintenance
centre. Technical expertise is
required to install or disassemble
the device.
NOTICE
䳜 If you experience any problems
with the system, contact your
place of purchase or dealer.
䳜 Placing the infotainment system
within an electromagnetic envi -
ronment may result in noise
interference.
Turning the system on or off
To turn on the system, start the
engine.
䳜 If you do not want to use the sys
-
tem whilst driving, you can turn
off the system by pressing the
[
POWER ] button on the control
panel. To use the system again,
press the [
POWER ] button again.
After you have turned off the
engine, the system will automati
-
cally turn off after a whilst or as
soon as you open the driver䳓s door.
䳜 Depending on the vehicle model or
specifications, the system may
turn off as soon as you turn off
the engine.
䳜 When you turn back on the sys -
tem, the previous mode and set
-
tings will remain intact.